4300
Type II Clear PVC
Transparent, high impact, corrosion resistant Type II PVC sheet with a smooth polished surface on both sides. Boltaron® 4300 is suitable for thermoforming and conforms to ASTM D-1784.
Characteristics
- Clear, smooth, polished surface on both sides
- Conforms to ASTM D1784
- E162 radiant panel flame spread <10
- Thermoformable
- High impact resistance
Uses
- Equipment windows
- Machined parts
- Thermoformed parts
Performance Details
FAR Ratings
- FAR 25.853(a)(i) (Flammability) (Vertical burn, 60 sec) Pass
- FAR 25.853(a)(ii) (Flammability) (Vertical burn, 12 sec) Pass
Properties
- Name Test Method Imperial Metric
- Specific Gravity ASTM D792 1.3
- Tensile Strength ASTM D638 6,000 psi 41 MPa
- Flexural Strength ASTM D790 9,200 psi 63.4 MPa
- Flexural Modulus ASTM D790 3.5x10ʌ5 psi 2,413 MPa
- Izod Impact Notched ASTM D256 73 °F 10.0-15.0 ft-lb/in 23 °C 534 -801J/m
- Heat Deflection Annealed ASTM D648 150 °F @ 264 PSI 66 °C @ 1.8 MPa
- Thermal Expansion ASTM D696 2.5x10ʌ-5 4.5x10ʌ-5
- Modulus of Elasticity ASTM D638 3.0x10ʌ5 psi 2,068 MPa
- Hardness Rockwell R ASTM D785 105
- Hardness Shore D ASTM D2240 80
- Compression Strength ASTM D695 7,400 psi 51 MPa
- Shear Strength ASTM D732 5,300 psi 36.5 MPa
- Water Absorption 24 Hours ASTM D570 0.05%
- Thermal Conductivity (BTU/HR/FT/F/in.) ASTM C177 0.50
- Specific Heat (CAL/GM/°C) ASTM C351 0.29
- Dielectric Strength (Volts/Mil.) ASTM D149 350
- Volume Resistivity (Ohms/cm) ASTM D257 5.26 x10 ʌ-14
- Dielectric Constant (60Hz) ASTM D150 4.0
- Dissipation Factor (60Hz) ASTM D150 0.005
- Loss Index (60Hz) ASTM D150 0.02
- FLAMMABILITY* UL 94 V-0 *Values based on a minimum thickness of 1.5 mm (.059 inches), UL File #: E54688
* Independent lab tests. All tests at 73 °F (23 °C) in dry conditions unless otherwise noted.
Sheet Sizes
- Name Imperial Metric
- Lengths to 96 in 2,438 mm
- Widths to 48 in 1,219 mm
- Gauges from .062 to 1.0 in 1.575 to 25.4 mm
- Custom Sizes Blank sizes, gauges on request