Boltaron® 4050
TYPE II PVC
Characteristics
- High impact
- Corrosion resistant
- Suitable for thermoforming
- Conforms to ASTM D1784
- Smooth finish
- Meets LP535A Comp A
Uses
- Linings and thermoformed parts
- Machined parts
- Fume hoods
- Acid etching, and acid tanks
Performance Details
Properties
- Name Test Method Imperial Metric
- Specific Gravity ASTM D792 1.35
- Tensile Strength ASTM D638 5,600 psi 39 MPa
- Flexural Strength ASTM D790 8,000 psi 55 MPa
- Flexural Modulus ASTM D790 300,000 psi 2,068 MPa
- Izod Impact Notched ASTM D256 73 °F 10-15 ft-lb/in 23 °C 534-801 J/m
- Heat Deflection Annealed ASTM D648 160 71
- Thermal Expansion ASTM D696 0.000018 0.000032
- Flammability - UL UL 94 V-0
- Hardness Rockwell R ASTM D785 116
- Elongation Ultimate ASTM D638 122%
- Elongation Yield ASTM D638 4%
- Modulus of Elasticity ASTM D638 320,000 psi 2,068 MPa
- Hardness Shore D ASTM D2240 80
- Compression Strength ASTM D695 8,000 psi 55 MPa
- Shear Strength ASTM D732 6,500 psi 45 MPa
- Water Absorption 24 hrs. 0.056 %
- Thermal Conductivity ASTM C177 0.74 BTU/HR/FT/F
- Specific Heat ASTM C351 0.21 CAL/GM/°C
* Independent lab tests. All tests at 73 °F (23 °C) in dry conditions unless otherwise noted.
Sheet Sizes
- Name Imperial Metric
- Lengths to 96 in 2,438 mm
- Widths to 48 in 1,219 mm
- Gauges from 0.032 to 0.2 in from 0.813 to 50.8 mm
- Custom Sizes Blank sizes, gauges on request
ELECTRICAL PROPERTIES
- Dielectric Strength ASTM D149 335 Volts/Mil.
- Dielectric Constant ASTM D150 2.85 @60Hz
- Dissipation Factor ASTM D150 0.016 @60Hz
- Loss Index ASTM D150 0.045 @60Hz
- Volume Resistivity ASTM C257 1.8x10^14 Ohms/cm