4065MP
MEMBRANE PRESSED
Wood core substrates that are membrane pressed or flat laminated with Boltaron®
4065MP sheet look new even after years of impacts, abrasion, harsh cleansers and
the general abuse of commercial and institutional environments.
Characteristics
- Tough, scratch resistant surface
- Formability in deep draw, sharp corners
- Izod impact strength of 18 ft-lb/in. (953 J/m)
- Economical thin gauges .018 in (0.045 mm) to .028 in (0.071 mm)
- Uniform surface quality
Uses
- Flat and 3D laminated panels
- Checkout counters
- Kiosks
- Store fixtures, displays
- Table tops
- Logo and trademark panels
Performance Details
Properties
- Name Test Method Imperial Metric
- Specific Gravity ASTM D792 1.370
- Izod Impact Notched ASTM D256 73°F 5 - 18 ft-lb/in 106.8°C 267 - 953 J/m
- Hardness Rockwell ASTM D785 106
- Heat Deflection Annealed ASTM D648 165°F @ 264 PSI 74°C @1.8 MPa
- Flammability - UL UL 94 UL 94 V-0
- Ball Impact Resistance NEMA LD3 - 2005 >3000
- Dart Impact Resistance NEMA LD3 - 2005 >1100
- MEMBRANE PRESSING TYPICAL PARAMETERS
- Cycle Times Preheating 45-50 Seconds Pressing 40-45 Seconds Cooling 35-40 Seconds
- Typical Heater Settings Top: 257 - 284°F Bottom: 172 - 185°F Top: 125 - 140°C Bottom: 78 - 85°C
- Pressure 45 psi 3 Bars
* Independent lab tests. All tests at 73 °F (23 °C) in dry conditions unless otherwise noted.
Sheet Sizes
- Name Imperial Metric
- Lengths 120 in 3,048 mm
- Widths 60 in to 1,524 mm
- Gauges to .018 in (0.045 mm) from .028 in (0.071 mm)
- Custom Sizes Custom sizes on request
Membrane Pressing Typical Parameters
- Cycle Times
- Preheating 45-50 seconds
- Pressing 40-45 seconds
- Cooling 35-40 seconds
- Typical Heater Settings
- Top 257 - 284°F 125 - 140°C
- Bottom 172 - 185°F 78 - 85°C
- Pressure 45 psi 3 Bars
Flammability
- UL 94 V-0