Boltaron
Colors, Patterns and Textures of PVC, PVC-alloy and CPVC Performance Sheet

4332

Ultra-high Impact, Thermoplastic Sheet Ideal for Gun Holsters and Knife Sheaths

Impact Extreme impact resistance, outstanding physical properties and a wide variety of colors and textures make Boltaron 4332 the ultimate alloy material for your most demanding applications.

Boltaron 4332 sheet is a proprietary, fire retardant, thermoplastic alloy that offers outstanding physical properties, making it the ideal material from which to thermoform and fabricate parts subjected to high impact, abrasion, harsh chemicals and/or temperature extremes.

With an Izod impact rating of 20 ft lbs/in (1060 J/m) Boltaron 4332 is among the most impact resistant thermoplastic alloys ever produced.

It is also exhibits extreme resistance to heat deformation and cold weather cracking, and is highly resistant to caustic and acidic chemicals spanning the entire pH range, in addition to offering greater abrasion resistance than stainless steel.

At the same time, Boltaron 4332 is non-hygroscopic, eliminating the time and cost associated with pre-drying other thermoplastics, and is readily thermoformed, yielding uniform wall thickness in deep recesses and on sharp outside corners.

It is also readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded, adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies.

Easy to use but difficult to damage, Boltaron 4332 eliminates the compromise associated with lesser thermoplastic alloys, FR ABS, and other fire rated thermoplastics, meeting and exceeding the most demanding requirements of fomers, fabricators and OEMs alike.

Boltaron 4332 Ultra-high Impact, Fire Rated, PVC/Acrylic Sheet

Boltaron 4332 Ultra-high Impact, Fire Rated, PVC/Acrylic SheetBoltaron 4332 Ultra-high Impact, Fire Rated, PVC/Acrylic Sheet

Outstanding physical properties make Boltaron 4332 the ideal material from
which to thermoform and fabricate damage-resistant parts.

Outstanding physical properties make Boltaron 4332 the ideal material from which to thermoform and fabricate damage-resistant parts.

APPLICATIONS
  • Gun holsters
  • Knife sheaths
  • Equipment housings
  • Store fixtures
  • Push plates and kick plates
  • Other flat and formed components requiring extreme durability

FEATURES
  • Izod Impact resistance of 20 ft lbs/in (1060 J/m)
  • Extreme resistance to heat deformation and cold weather cracking
  • Exclusive carbon fiber texture pattern
  • Unlimited custom colors
  • Six standard surface textures plus unlimited custom textures
  • Extreme formability with uniform wall thicknesses
  • Gauges from .028 to .250 in. (0.71 to 6.35 mm)
  • Lengths to 120 in. (3048 mm), widths to 60 in. (1524 mm)
  • Custom blank sizes available
  • Readily machined using conventional tools
  • Can be heat welded, adhesive bonded, mechanically fastened
  • Free of pits, voids, and inclusions
  • Extreme chemical and abrasion resistance
  • UL 94 V-0 fire rating

PROPERTIES/RATINGS

PROPERTY TEST METHOD TYPICAL VALUES
Specific Gravity ASTM D-792 1.35
Tensile Strength (PSI) ASTM D-638 4,700
Flexural Strength (PSI) ASTM D-790 9,700
Flexural Modulus (PSI) ASTM D-790 340000
Izod Impact (Ft. lbs./in. of notch) ASTM D-256 20
Hardness Rockwell R ASTM D-785 106
Heat Deflection(F) 264 PSI (annealed) ASTM D-648 155
Flammability
FAA

FAR 25.853 A1, (i)
(60 sec.)
FAR 25.853 A1, (ii)
(12 sec.)

PASS
 
PASS
UL UL-94
UL-94
V-0, 5VA1
V-0, 5VB2
Forming Temperature (F)   335-385

1 Values based on minimum thickness of .125", UL File # E54688
2 Values based on minimum thickness of .040", UL File # E54688
 

AVAILABILITY

Colors: Unlimited custom colors
Gauges: .028 to .250 in. (0.71 to 6.35 mm)
Widths: Up to 60 in. (1524 mm)
Lengths: Up to 120 in. (3048 mm)
Custom blank sizes: Upon request
Textures: Coarse Matte (CM), Felt (FT), Haircell (HC), Levant (LT), Mesa (MS), Suede (SD)
 

OTHER BOLTARON UL 94 V-O RATED SHEET PRODUCTS FOR THERMOFORMING AND FABRICATION:

LIMITATION OF WARRANTY
The application suggestions, specifications and other data described here are based upon experience and information that is believed, by BOLTARON Inc., to be reliable. However, BOLTARON Inc. makes no express or implied warranty that BOLTARON 4332 will perform in accordance with such specifications in any particular circumstance. Therefore, ALL EXPRESS OR IMPLIED WARRANTIES IN CONNECTION WITH BOLTARON 4332, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. The prospective user should determine the suitability of BOLTARON 4332 and the application suggestions before actual application.


© Copyright 2009 Boltaron | Terms and Conditions of Sale | Sitemap